Menu
Cart 0
CC-10 9-3/4 in. x 2-7/8 in. Coconut Carbon Drinking Water Filter

CC-10 9-3/4 in. x 2-7/8 in. Coconut Carbon Drinking Water Filter

Article Number:
  • $ 1201


Reduces chlorine taste and odor, MTBE, VOCs, and sediment in residential and commercial drinking water . Nominal filtration rating of 20 micron . Granular activated carbon (GAC) media with polystyrene outer casing and end caps . Initial pressure drop of 4.5 psi at a flow rate of 1 GPM . Temperature range of 40°F to 125°F (4.4°C to 51.7°C)

This Pentek CC-10 coconut carbon filter cartridge reduces chlorine taste and odor, methyl tertiary butyl ether (MTBE), certain volatile organic compounds (VOCs), and sediment in residential and commercial drinking water. It has a nominal (85%) filtration rating of 20 microns. It will reduce free available chlorine (FAC) at 2 PPM by at least 75% in up to 7500 gal. at a flow rate of 1 GPM. The filter media is made of coconut shell based granular activated carbon (GAC) for greater VOC reduction than standard GAC. The media is enclosed in a polystyrene outer casing and end caps, and there is a spun propylene post-filter to reduce carbon fines and other suspended particles. The nitrile butadiene rubber (Buna-N) and Santoprene gaskets seal the cartridge against the housing (sold separately). The filter operates over a temperature range of 40 to 125°F (4.4 to 51.7°C). This filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for purification of residential and commercial drinking water. Nominal filtration rating 20 microns Initial pressure drop at 1 GPM 4.5 psi Chlorine reduction 7500 gal. at 1 GPM. Operating temperature range 40 to 125°F (4.4 to 51.7°C). Maximum dimensions (H x W) 9-3/4 in. x 2-7/8 in. (248 mm x 73 mm). Materials certification NSF/ANSI standard 42.

We Also Recommend