Cart 0
92.1 Percent AFUE 38,000 BTU Upflow/Horizontal Residential Gas Furnace

92.1 Percent AFUE 38,000 BTU Upflow/Horizontal Residential Gas Furnace

Article Number:
  • $ 1,22065

100 Percent fired and tested on the manufacturing line to ensure proper operation . 30 second blower delay at start-up to assure warm duct temperature at furnace start-up; with adjustable blower off settings at 60, 90, 120, and 180 seconds . Hot surface igniter with Smartlite technology assures safe and efficient operation . Color coded wire harness with quick-connect fittings to all components for ease of service and replacement . May be vertically or horizontal vented using either a one-pipe or two-pipe system for maximum flexibility in installation . Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation . Input BTU is 38,000 and output BTU is 35,000 . To qualify for the extended 10 years parts warranty, the equipment must be registered online at within 60 days of installation for replacement or 60 days after closing on a new home construction. Some states do not require registration, but proof of installation is required to qualify for the 10 year parts warranty . BTU input of 38,000 and 35,000 BTU output . Natural gas ready and may be converted in the field to LP using the optional GLP 028 conversion kit . Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty. See installation guide for more details. . Professional Installation recommended . Click here for more information

Ideal for new or replacement residential or commercial installations. The 38,000 BTU Input KG7SC Series 92.1 percent efficiency residential gas furnace has a 34 1/2 in. tall cabinet and is designed for installation in up-flow and horizontal applications. This single stage, high efficiency furnace is natural gas ready and convertible to propane (LP Gas) with the optional GLP 028 conversion kit. All KG7SC furnaces are certified for Category IV venting and may be vented either through a side wall or roof applications using approved plastic as allowed by the National Fuel Gas Code. Features an electronic hot surface igniter for increased safety and efficiency, and adjustable 4 speed maintenance free direct drive blower that never needs lubrication, and self diagnostic control module to monitor operation. The primary heat exchanger is constructed of tubular aluminized steel and has a stainless steel secondary heat exchanger. Units are factory assembled, wired and tested to assure safe dependable and economic installation and operation. NOTE: Requires 1/2 in. input to gas valve, dedicated circuit breaker, and 120-Volt wiring with proper polarity and ground. Consumer is required to register the product online within 60 days of installation to qualify for the extended 10 years parts warranty and limited lifetime heat exchanger warranty. Dimensions: 34.5 in. H x 14.25 in. W x 28 in. D. Not certified for mobile home use.

We Also Recommend