Menu
Cart 0
Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 60 in. Stainless Steel Gas Connector 5/8 in. O.D. (93,200 BTU)

Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 60 in. Stainless Steel Gas Connector 5/8 in. O.D. (93,200 BTU)

Article Number:
  • $ 3284


1/2 in. I.D. (5/8 in. O.D.) corrugated stainless steel with corrosion resistant coating . Safety+PLUS excess flow valve protects against gas fires and explosions - 1/2 in. MIP connection to gas supply or gas ball valve . Safety+PLUS valve ideal for most common household gas appliances . Safety+PLUS valve features automatic activation and reset . Safety+PLUS valve is 100% factory performance tested . Safety+PLUS valve installs like a standard gas fitting; can be installed in vertical or horizontal position . ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt . Use with natural and LP (propane) gases . Gas connector is 100% leak tested . Approved for indoor and outdoor use . Temperature rating: 32° F to 150° F . Pressure rating: 1/2 psi maximum . Designed, machined and assembled in the USA . CSA certified

BrassCraft’s Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

We Also Recommend