Menu
Cart 0
2.0 in. Drawer Drain Plug Set for Pick Up Truck Storage System, Black

2.0 in. Drawer Drain Plug Set for Pick Up Truck Storage System, Black

Article Number:
  • $ 2000


Drain plugs are designed to fit the molded-in recess found in the bottom (cab side) of your DECKED drawers . A small tube of sealant is included to provide a watertight seal, the drain plug recess, found in the standard length drawers, are located out of reach . Pickup truck beds naturally drain toward the cab, not the tailgate that is why the drain plugs are cab side, however, if you prefer, you can drill a small hole in the tailgate end of the drawers (there is a dimple to get your hole started) to create a simpler solution (but that will also create an opportunity for water intrusion) . Drain plugs are not recommended for 6 ft. 5 in. bed length pickup trucks

DECKED is an innovative, weatherproof truck bed storage and organization solution. 2 full bed-length drawers slide on heavy duty wheels in steel channels to offer dry, secure storage with ergonomic access for tools, gear, guns, fishing rods and other items. Made to fit Ford, Dodge RAM, Chevy, GMC, Nissan and Toyota full sized trucks, DECKED allows full use of the pickup truck bed’s footprint providing organized storage under the deck. DECKED has a 2,000 lbs. payload on the deck and 200 lbs. per drawer load capacity. Further organization and customization is possible with optional drawer dividers, cargo trays, rack tie downs and locks. 100% recycled High-Density Polyethylene (HDPE) and steel. All steel hardware is finished with stainless, galvanized, or zinc chromate rust inhibitors. Covered by a 3 year warranty against product defects or failure due to workmanship. Note: drawers are not water or airtight, some fine particulate matter such as dust and water vapor may enter. Assembly and installation time approximately 2 hours. Removal/reinstall time approximately 15-20 minutes. Tools necessary: adjustable wrench, Philips screwdriver, 1/2 in. and 7/16 in. open wrenches, Pliers, 3/8 in. socket and 7/32 in. hex wrench. Some vehicles require additionally: 10 mm socket, T30 or T40 Torx driver.

We Also Recommend