Menu
Cart 0
SaniCubic 21 HP 220/240-Volt Grinder Pump

SaniCubic 21 HP 220/240-Volt Grinder Pump

Article Number:
  • $ 2,71915


Can handle up to 60 GPM from several fixtures . Dual motor for absolute reliability and power . Thermally protected and alarm mounted on the unit . Easy above the floor installation . Accepts accidental flushing of sanitary items such as feminine hygiene products . Note that the effluent pipe leading into the pump has to be installed with the required 1/4 in. per foot gravity flow; there must be a 10 in. of height difference (from pump to connecting fixture) if the drain is connected to the bottom inlet . Wastewater from other sanitary fixtures is discharged into the SaniCubic 2 via five 1-1/2 in. or 4 in. inlets, on either side of the housing and on the top of the enclosure; the internal discharge pipes come equipped with check valves that prevent back flow into the unit; isolating valves (ball, gate valves) must be installed on waste inlets and on the discharge pipe to ensure that any service/maintenance may be carried out safely . Unit has been designed with a 1-1/2 in. vent connection on the top of the enclosure; all plumbing codes require connection to a vent system; please note that the vent system should be a 2-way air vent; the use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered 1-way air vent systems . High Quality Protection Plan:

The SaniCubic 2 is a pre-assembled heavy-duty duplex grinder pump that meets the demanding needs of commercial and residential sewage applications. The duplex-grinder system made of stainless steel liquefies solids into small particles prior to being passed through the 1-1/2 in. discharge. It is designed to handle multiple waste fixtures for applications such as residential single or group homes, commercial buildings, schools and many more. This new system consists of two 1 HP motors housed inside a compact but highly durable plastic enclosure. Each independently operating grinder has its own high-performance grinding system: a fast-rotating cutting blade to reduce solids in the wastewater stream from toilets, tubs and showers, sinks, washing machines, dishwashers, etc. The SaniCubic 2 operation is as simple as the installation. The effluent enters the pump through 1 of 5 different inlets - 1 on either side of the unit at the bottom and 3 along the top. The inlets can accommodate 1-1/2 in. or 4 in. of diameter pipes. As soon as the wastewater level reaches the trigger point, the pumping system activates. The effluent is then pumped out through 1-1/2 in. of diameter rigid pipe connected on the top of the pump. Maximum pumping distances are 36 ft. vertically and/or 328 ft. horizontally.

We Also Recommend