Menu
Cart 0
120-Volt Die Cast Aluminum Photo Control

120-Volt Die Cast Aluminum Photo Control

Article Number:
  • $ 1427


Die case aluminum housing and base, gasketed for weather protection . Our sensor is conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye . Creates energy savings as it works with screw base CFLs and is UL listed for LED-drivers with power consumption average of less than 1 watt by turning on or off as needed, on/off: turn on is 1 to 5fc, turn off is 3 to 15fc, without the slide in position, on/off adjustment is easily made by moving a slide cover, no tools required . Easy to operate with delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning, etc. in temperature range of -40 degrees to +140 degrees F (-40 degrees to +60 degrees C) . Our cell is cadmium sulphide, epoxy conformal coated, 1/2 in. diameter, model 2117 is 1 in. cell, the contacts will remain closed between dusk and dawn (the unit fails in the on position) . Lead wires are 3 color coded, minimum 6 in. wire leads, #16AWG, rated for 105 degrees C. (2117#10AWG red and black)

The TORK 2115 SPST Die Cast Aluminum Photo Control is great for Parking lot lighting, building perimeter lighting, outdoor signage applications. Our Photocell responds to the light spectrum near to that of a human eye not to light flashes creating energy savings.

We Also Recommend